Current stock: 0

Set of GrimmSpeed TGV to Engine Gaskets. We recommend replacing these any time you pull your TGVs off.

These come as a pair, pick up an additional pair of these to match up with your GrimmSpeed Phenolic Spacers. 

Note:The pin holes are deliberately made to be slightly smaller than the guidance pins, use a small socket during installation to push them onto the pins so that the gasket stays tightly in place as you install the TGVs/manifold.

Applications:

02-14 WRX

04-20 STI

04-13 FXT

05-13 LGT

Subaru TGV Gasket

 

SKU:
032001
Height:
8.00
Width:
3.00
Depth:
0.25

4 Reviews

4/5
Travis Beard 2nd May 2020

04 Forester XT Location holes

The pins that locate the tgv onto the head we’re a touch small and I had to enlarge them with a step bit to the next size up for proper fitment. It could be that older pins are dirty and need to be cleaned up a bit more.

3/5
YT 22nd Jun 2016

A Little Off

Great product but the bolt holes are off. Needed to get the car running so had to modify the holes for a proper flush fit. When installing it the gasket bends and doesn't sit flush, you'll need to enlarge the bolt holes to make is sit flush.

Add a Review