A Look Inside GrimmSpeed Turbocharger Testing: The BB450+ & BB550+
At GrimmSpeed, developing new performance parts means putting in the work long before they make it onto your vehicle. From engineering and prototyping to real-world testing, we're constantly exploring ways to deliver more performance for the platforms we love.
Our latest round of turbocharger testing is no exception.
We've been hard at work developing the next evolution of our turbocharger lineup: the GrimmSpeed BB450+ and BB550+. These new designs will take the place of our existing JB400 and BB500 turbochargers, bringing updated technology, greater power potential, and some exciting improvements to their respective powerbands.
While we're keeping a few details under wraps until their official release, our recent dyno testing offers a closer look at what these new turbos are capable of and why we're excited to bring them to market.
Putting the New Turbos to the Test
For this round of testing, we brought out a 2020 Subaru STI equipped with a built engine featuring upgraded rods and pistons, Stage 3 bolt-ons, and E85 fuel. All testing was performed on a Mustang Dyno, allowing us to evaluate horsepower and torque delivery across the RPM range and compare the performance of each turbocharger.
Using this platform, we collected dyno data from multiple turbocharger configurations, including the factory VF48, our existing JB400 and BB500, and their upcoming replacements, the BB450+ and BB550+.
The goal was straightforward: evaluate horsepower and torque delivery throughout the RPM range, examine how each turbo builds power, and see how our latest designs compare to their predecessors. Peak horsepower is always an exciting number, but it doesn't tell the entire story. Where a turbo makes its power, how quickly torque develops, and how well that performance carries through the upper RPM range are all important considerations.
And as the results show, both the BB450+ and BB550+ have plenty to offer.
BB450+: A Strong Balance of Power and Response
The upcoming GrimmSpeed BB450+ is set to replace our existing JB400, bringing a significant change to its internal design. Most notably, the BB450+ moves away from the JB400's traditional journal bearing system in favor of ceramic ball bearings, along with a performance profile that builds on the strengths of its predecessor.
And the dyno results tell an interesting story.
On our E85 test configuration, the BB450+ produced approximately 485-wheel horsepower and 460 lb-ft of wheel torque, compared to the JB400's roughly 395 WHP and 415 lb-ft of peak torque.
That's a gain of approximately 90 peak WHP and 45 lb-ft of peak torque, but the real story becomes clear when looking at the full power curves.
The BB450+ delivers stronger horsepower and torque through much of the RPM range, with an especially noticeable advantage toward redline. At approximately 6,500 RPM, the BB450+ maintains around 480 WHP, while the JB400 produces roughly 370 WHP.
The result is a broader, stronger powerband that builds on the JB400's performance while delivering considerably more horsepower through the upper RPM range.
BB550+: Taking Top-End Performance Further
The GrimmSpeed BB550+ takes a similar approach to advancing our existing lineup, but with a different performance objective. Replacing the BB500, the BB550+ features a larger turbocharger design intended to deliver significantly greater top-end power while keeping low-RPM performance surprisingly close to its predecessor.
And that's exactly what we observed during testing.
On our E85 test vehicle, the BB550+ produced approximately 530 WHP, compared to the BB500's roughly 460 WHP, an increase of approximately 70 peak wheel horsepower.
And there's more to the story. Our test vehicle's 1300cc injectors limited fuel delivery at approximately 530 WHP, so we capped the pull at 27 PSI of boost. Our engineering team estimates the BB550+ has another 5–6 PSI of boost available before leaving its efficiency range, meaning these results don't necessarily represent its maximum potential.
Looking at the power curves, the BB500 reaches peak torque around 4,600 RPM, while the BB550+ builds more progressively, reaching its peak around 5,500 RPM. However, the BB550+ still develops a noticeable torque bump near 4,500 RPM, similar to the BB450+ and BB500, helping maintain a responsive midrange for a larger, stock-location turbocharger.
The BB550+ overtakes the BB500 in horsepower at approximately 5,200 RPM, with its advantage continuing to grow toward redline. At around 6,500 RPM, the BB550+ maintains more than 520 WHP, compared to approximately 450 WHP from the BB500.
It's a compelling trade-off: a modest reduction in lower-RPM performance in exchange for substantially greater horsepower where the BB550+ really shines.
More Than Just Peak Numbers
One of the biggest takeaways from this testing was seeing how our latest turbocharger designs improve upon their predecessors in different ways.
With the BB450+, the focus is on delivering stronger performance throughout the powerband, combining updated bearing technology with impressive midrange and top-end output. The BB550+ takes things further at higher RPM, offering considerably more horsepower while retaining much of the BB500's lower-RPM performance.
Both demonstrate why we spend so much time evaluating the entire power curve rather than focusing exclusively on a single number. Our engineering team uses this data to understand how each design performs, identify meaningful improvements, and ensure that the next generation of GrimmSpeed turbochargers offers real advantages over the parts they're replacing.
The Next Evolution of GrimmSpeed Turbochargers
The BB450+ and BB550+ mark an exciting step forward for our turbocharger lineup, building on what we've learned from the JB400 and BB500 while pushing performance further. And we're not done sharing what we've been working on.
There's still more to come, including additional technical details, product specifications, and a closer look at the engineering behind these new designs. Keep an eye on GrimmSpeed as we get closer to the official release of the BB450+ and BB550+.
Two new turbochargers. Two proven platforms to build upon. And a new generation of GrimmSpeed performance on the way.